Vector frequency inverter 220 to 380, 2.2 kW from the SPLC-NZ2200 series is designed to control the speed of three-phase asynchronous motors with power up to 2.2 kW.
A distinctive feature of this inverter is the built-in block for boosting output voltage. The inverter is powered by a typical single-phase network 220 V, while the working output is connected to a three-phase motor 380 V with a star winding connection (necessary to maintain nominal torque on the shaft).
This frequency inverter model SPLC-NZ2200-2R2GS2 has a protection degree of IP20. It is recommended to install it on a DIN rail in specialized enclosures for dust and moisture protection.
The control panel, if necessary, can be removed and placed on the front panel of the cabinet. Cable and mounting are not included in the price, supplied on order.
Table — Main Technical Parameters of Inverter SPLC-NZ2200-2R2GS2
| Input Voltage |
1ph 220 V
|
| Output Voltage |
3ph 380 V
|
| Output Power |
2.2 kW
|
| Output Frequency Range |
from 1 to 800.0 Hz
|
| Protection Degree EN 60529
|
IP20 |
Additional Information
Power Circuit of Frequency Inverters SPLC-NZ2200-2R2GS2:
- Input power from a network 1 phase 220 V AC 50/60 Hz;
- Output to motor - 3 phases, linear output voltage from 0 to 380 V, frequency - in range from 1 to 800 Hz;
- Allowable overload for 60 s - up to 150% of nominal current value (in constant load mode)
Control Circuit SPLC-NZ2200-2R2GS2:
- 6DI — six digital inputs, functions of which can be custom-set via menu selection. For instance, a digital input can be used for the start command, forward run, reverse, stop, jog frequency skipping, switching between frequency sources X and Y, switching between 16 preset speed frequency values, switching between 4 acceleration and deceleration modes, remote frequency increase/decrease, timer start, PID control, built-in controller program, etc.
- 2AI — two inputs, one of which can be switched via J jumper to take the corresponding analog signal by current 4…20mA or voltage 0…10V, the other supports 0…10V;
- 2DO — two multifunctional digital outputs, one of which is relay, which can be used for output signal ON-OFF about working condition, achieving frequency or time counter, completion of PLC program step or cycle;
- 1AO — one output that supports analog signal by current 4…20mA or voltage 0…10V;
- RS485 — RS485 serial port connector to integrate into industrial set of NLP frequency converter, controllers, industrial PCs, etc.
You can buy the frequency inverter SPLC-NZ2200-2R2GS2 with power 2.2 kW from the company "Specialist" with delivery to Kyiv, Dnipro, Kharkiv and other cities of Ukraine. Inquire about delivery times with the online store managers.
In Stock
