Compact single-acting pneumatic cylinders with a return spring in the rod chamber and single-side rod outlet of the SC-SSA series ensure rod retraction in the absence of air supply. These short-stroke pneumatic cylinders have a piston diameter from 12 to 32 mm. For compactness, rubber washers are used instead of air cushioning. This type of actuator is common on small-sized Chinese machines.
Upon customer request, SC-SSA pneumatic cylinders can be made:
- with a magnet to control the position of the piston using a reed switch (indicated by the letter "S" in the code)
- without a piston magnet, allowing for a smaller cylinder length.
We sell SC-SSA pneumatic cylinders assembled in Ukraine by our manufacturer company "Specialist". We use robust steel rods, an aluminium body, and universally pneumatic NBR seals.
Table 1 — Technical Specifications of Single-Acting Cylinders SC-SSA
| Piston Diameter, mm |
12 |
16 |
20 |
25 |
32 |
40 |
50 |
63 |
80 |
100 |
| Maximum Stroke Length, mm |
60 |
100 |
120 |
130 |
| Thread Connection |
M5×0.8 |
G1/8" |
G1/4" |
G3/8" |
| Action Type |
Single-acting with spring in rod chamber |
| Working Medium |
Compressed air after filtration to at least 40 microns |
| Working Pressure Range |
0.1-10 bar |
| Maximum Inlet Pressure |
12 bar |
| Operating Temperature Range |
−10-70℃ |
| Damping |
Damping washer |
| Sensor Type (for SC-SDA cylinder with magnet on piston) |
SC-CS1-J |
Compact pneumatic cylinders of the SSA series with single rod can be ordered in two variations:
- Internal ("female") thread on the rod (default)
- External ("male") thread on the rod SSA-...-B
On order
