Air filter regulator MS6-LFR-1/2-D7-ERM-AS with built-in cylinder lock and pressure gauge

The MS6-LFR-1/2-D7-ERM-AS filter-regulator is designed for regulating and stabilizing the working pressure in pneumatic systems. The device effectively smooths air fluctuations, ensuring stable equipment operation.

Features of the MS6-LFR-1/2-D7-ERM-AS Pressure Regulator with Filter

• Filtration and Regulation: The MS6-LFR-1/2-D7-ERM-AS filter-regulator with centrifugal cleaning removes dirt particles and condensate, ensuring clean air and equipment protection.
• Air Stabilization in Pipeline: The device smooths out pressure fluctuations, maintaining it at the specified level for stable pneumatic system operation.
• Easy Maintenance: The filter regulator is equipped with manual, semi-automatic, and fully automatic condensate drainage functions, simplifying its maintenance and operation.
• Additional Protection: A built-in cylinder lock prevents unauthorized pressure setting changes. The pressure gauge allows precise pressure control.

Installing the Mechanical Pressure Regulator with Filter and Pressure Gauge

The installation of the MS6-LFR-1/2-D7-ERM-AS pressure regulator requires the use of shut-off valves to isolate the system from compressed air. It is important to consider the flow direction from 1 to 2, guided by the markings on the product body. The filter-regulator must be positioned with sufficient space for the filter container (minimum 100 mm) to facilitate filter replacement. Install the device vertically (±5°).

Operation of the MS4-LFR-1/4-D7-ERM-AS Filter-Regulator

1. Pull the adjustment handle upwards from the body
2. Turn the handle in the "-" direction until it stops
3. Slowly supply air to the system, switch on the consumer
4. Turn the handle in the "+" direction until the desired pressure on the gauge scale is achieved
5. Press the handle down to lock it from accidental turning

Shopping at Specialist Store – Convenience and Reliability for Every Customer

We have conveniently located warehouses in Lviv and Dnipro, allowing us to quickly process your order and ensure delivery throughout Ukraine.

We offer a flexible cash-on-delivery system via the "Nova Poshta" delivery service. This means you can pay for the product upon receiving it directly in hand and ensure its quality and conformity with your expectations.

Maintenance and Care

• If the condensate level is below 10 mm of the filtering element, manual drainage is required. Locate the drainage screw at the bottom of the filter housing and turn it counterclockwise. This will open the drain hole through which condensate will flow out. After draining, close the screw by turning it clockwise. Ensure the screw is tightly closed to prevent leakage. These actions will help maintain optimal system performance and prevent moisture accumulation.
• If the condensate level is above 10 mm of the filtering element, semi-automatic or fully automatic drainage occurs, allowing you to prevent overflow and maintain optimal system performance without operator intervention.

Air Filter-Regulator MS6-LFR-1/2-D7-ERM-AS - a reliable solution for ensuring stable pressure and quality filtration in pneumatic systems. Easy installation and maintenance make it efficient and easy to operate.