Screw Compressors 16 Bar

High-pressure air compressor (16 bar) is a powerful industrial pneumatic compressor for single-stage air compression up to 1.6 MPa. Pneumatic boosters of the SCC-ZAHY series with a dryer and moisture separators on a large volume horizontal receiver 300-350 litres are often used for laser cutting machines and PET bottle blowing machines.

Air compressor 16 atm for laser machine

Sometimes laser cutting machines are supplied with a built-in small compressor unit. Integrated laser compressors have very compact dimensions and allow the equipment to be positioned in a small space, but their main drawbacks are low power, poor air quality filtration, and high moisture content.

Humidity and contamination of compressed air not only affect the efficiency of laser cutting but also cause rusting of parts and damage to the lens, and increase the risk of material ignition.

Thus, the main advantages of the external screw compressor SCC-ZAHY for lasers:

• The assembly contains not only the compressor for air compression up to 16 atmospheres, but also additional purification from compressor oil and drying. The refrigerant dryer in the unit cools the air flow for moisture condensation, moisture separators remove microdroplets of water from the air, and filters remove oil residues and rust particles — the air output from the compressor is technically clean;
• The electrically driven screw oil-injected compressor with direct drive has the highest efficiency and low wear of parts. The oil increases tightness during compression as well as protects parts from abrasion. Post-compression filtration cleans the air of lubrication;
• Sale of screw compressors and spare parts from warehouses in Ukraine. We are direct importers of these compressor units, so you purchase tested and high-quality equipment at a fair price;
• Productivity of screw compressors SCC-ZAHY — up to 3400 l/min.

If you have a compressor, you can purchase separate refrigerators, adsorption dryers and air filters after the compressor from us.