Compressors 400 L/min

Air compressors 400 L/min (0.4 m³/min) are small compressor units that cover air consumption of 400 litres per minute. This capacity is enough to ensure the simultaneous operation of several pneumatic tools in a garage or workshop and some small machines.

Company “Specialist” offers a rotary-screw type compressor 400L/min with a wheeled receiver at 8 bar. This type of pneumatic compressor is significantly better than piston ones, as it has an oil-cooling system, can run continuously in 24/7 mode, is energy-efficient and has at least twice the lifespan without major repairs, low noise. These advantages fully compensate for the higher price of screw compressors.

Why is it better to buy a compressor with a productivity of 400 L/min in the SCC-CM4.0-05 series?

Our model SCC-CM4.0-05 covers the needs of 400 litres per minute with a margin of 25%, as it can deliver 500 litres at an output pressure of 8 atmospheres — this is the optimal delivery pressure for general industrial pneumatic systems. If you need to adjust it, use the pneumatic regulators SA-CM.

The power of the compressor at 400 L/min is 4 kW, so it is by default configured for connection to 380V. If you require the same compressor unit at 220V — ensure that your 220 Volt network is rated at 4000 W and call us to order a custom assembly.

The standard horizontal receiver for SCC-CM4.0-05 has a volume of 100 litres. Since the screw block at the output has significantly less pressure pulsation than piston heads, this allows the use of smaller expansion tanks to smooth out the “pumping” phenomenon from compressors. The 100L receiver helps make work stable. The welded handle helps to move the portable compressor around the workshop or for on-site work. To ensure you do not forget to drain the condensate, to prevent the receiver and pipeline from rusting, we recommend using automatic condensate drain valves — the solenoid valve will operate on a timer.